The tracker is live!

Friday I received the wires I needed to finish the wiring of the YB3i. And so I did a bit more contortion to wiggle the power wire from the back of the boat through a post, down the port pilot drive lazarette, through the liferaft lazarette, through the many cable conduits, and finally to the MPPT load posts. This also included crimping wires. In any case, it’s wired now. If the MPPT fails then there’s the option of plugging in the starter battery.

It’s live here:

Author: Skipper

Wannabe circumnavigator.

Leave a Reply

Verified by MonsterInsights